Johannes Ziegler
Head Sales
+49 9187 9522-227
+49 9187 9522-50
johannes.ziegler@frenco.de
Contact as vCard
Head Sales
+49 9187 9522-227
+49 9187 9522-50
johannes.ziegler@frenco.de
Contact as vCard
Measuring Inserts
Measuring Inserts are used in Size Inspection Instruments and to measure the size over/between balls.
FRENCO measuring inserts are always manufactured from carbide (1500HV) to minimise wear.
Measuring Balls
| Design | For ball dia. |
|---|---|
| Measuring balls soldered onto shaft, thread M2.5 | 1 to 7 mm |
| Measuring balls soldered onto shaft, thread M4 | 5 to 12 mm |
Measuring Tips
For diameters smaller than 1.5 mm.
| Design | Radius |
|---|---|
| Including M2 thread | Smaller than 0.75 mm |
| Including M2.5 thread (Standard) | Smaller than 0.75 mm |
| Including M3 thread | Smaller than 0.75 mm |
Measuring Pins
For the size inspection of spur gears.
| Material | Accuracy | Application |
|---|---|---|
| Carbide | ±0.001 mm | Precision workpieces |
| Carbide | ±0.0005 mm | Gauge inspection |
| Carbide | ±0.0005 mm | Masters and Artefacts |
